* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Returneringer accepteres inden for 40 dage fra modtagelsesdatoen. Tilpassede varer kan ikke returneres eller ombyttes. Varer købt med en e-gavekort kan kun ombyttes; refusion er ikke mulig.
Gratis Gave
Velkommen til Roymall, din professionelle hjemmeside til køb af premium stormagasinsgaver. Vi værdsætter og sætter pris på din support, og vi vil gerne vise vores taknemmelighed ved at tilføje en ekstra glæde til dine køb. Når du shopper hos os, får du ikke kun høj kvalitetsprodukter der forbedrer din livsstil, men du vil også modtage en eksklusiv gratis gave med hver ordre du placerer. Klar til at udforske vores samling og finde dine perfekte gaver? Gennemse vores udvalg af premium stormagasinsvarer, placer din ordre, og se frem til glæden ved at modtage din gratis gave sammen med dit køb.
Forsendelsespolitik
Vi vil arbejde hårdt for at levere varer til dig efter modtagelse af dine ordrer og sikre at de ankommer sikkert. Forsendelsesdetaljer vil blive givet i din bekræftelsesemail.I de fleste tilfælde behandles ordrer inden for 2 dage.Under særlige omstændigheder vil det blive forsinket som følger: Når du placerer en ordre på lørdag, søndag eller helligdage, vil det blive forsinket med 2 dage.Normalt tager det 5-7 arbejdsdage (mandag til fredag) uden at blive påvirket af flyforsinkelser eller andre miljøfaktorer.Fordi vores forsendelsesservice er verdensomspændende, vil leveringstiderne afhænge af din placering, så det kan tage lidt tid og vær venlig at vente tålmodigt hvis du er i fjerntliggende distrikter eller lande.
1. Returnering & Ombytning Politik
Vi accepterer kun varer købt fra roymall.com. Hvis du køber fra vores lokale distributører eller andre forhandlere, kan du ikke returnere dem hos os.Endelige salgsvarer eller gratis gaver accepteres ikke til returnering.For at være berettiget til en returnering, skal din vare være ubrugt og i samme stand som da du modtog den. Den skal også være i den originale emballage.Efter at have modtaget returneringsinstruktioner fra os, skal du pakke dine returnerede varer og aflevere din pakke på det lokale postkontor eller en anden kurer.Vi vil behandle din returnerede eller ombyttede vare inden for 3-5 arbejdsdage efter at vi modtager den. Refusionen vil blive behandlet og krediteret automatisk til din oprindelige betalingsmetode.Ingen returneringer eller ombytninger kan accepteres hvis produktet er produceret efter specialordre, herunder tilpasset størrelse, tilpasset farve eller tilpasset tryk.Har du brug for mere hjælp, kontakt os venligst. service@roymall.com eller Whatsapp: +447549870296
2.Refusionspolitik
Du får en fuld refusion eller 100% butikskredit efter at vi har modtaget den returnerede pakke og tjekket den. Refusionen vil blive behandlet og krediteret automatisk til din oprindelige betalingsmetode.Bemærk venligst at forsendelsesomkostninger og eventuelle toldgebyrer eller afgifter ikke refunderes. De ekstra forsendelsesomkostninger refunderes ikke, når pakken er blevet sendt. Du er ansvarlig for at betale disse gebyrer, og vi kan ikke fravige eller refundere dem, selv hvis ordren returneres til os.Når vi har modtaget og bekræftet din returnerede vare, vil vi sende dig en email for at meddele dig, at vi har modtaget din returnerede vare. Vi vil også meddele dig godkendelsen eller afvisningen af din refusion.Hvis du har problemer med refusionsprocessen, kontakt os venligst. service@roymall.com eller Whatsapp: +447549870296
Description:
The instrument is a small electronic enthusiasts, developers, electronic maintenance and production plant research and development of small instruments. Can be measured in-line devices, but also test chip devices, can be measured a variety of diodes, transistors, MOS tube; can determine the device type, the polarity of the pin, the output HFE, valve voltage, the junction capacitance of the FET, measurable capacitance and resistance.
Features:
1. Two key operation, automatic shutdown.
2. A key operation, boot test, a key to get.
3. Automatically test the pin element and display them on the LCD.
4.1602 LCD screen with LCD (12864 LCD backlight).
5. Test speed, active ingredient test: 2 seconds (in addition to the larger capacitor capacitance measurement also takes a long time, the measurement time is one minute is normal).
6. Only 20na off current.
7. Automatic detection of NPN, PNP bipolar transistors, N-channel and P-channel MOS field-effect transistors, junction type FET, diodes, diodes, thyristors, low power unidirectional and bidirectional thyristors.
8. Automatic identification element pin arrangement.
9. Bipolar transistor current amplification factor and base-emitter threshold voltage measurement.
10. Identify the Darlington transistor by the base emitter threshold voltage and the high current amplification factor.
11. Detectable bipolar transistors and MOS transistor protection diodes.
12. Gate MOS FET threshold voltage and gate capacitance measurement.
13. Two resistors and resistor symbols can be measured simultaneously. The right shows a decimal value of 4. Both sides of the resistor symbol show the number of pins. So you can measure the potentiometer. If the potentiometer wiper does not move to extreme positions, we can distinguish between the middle and the ends of the needle.
14. Resistive measurement resolution of 0.1Ω, can measure 50MΩ.
15. Can measure 325pf-100mf capacitor, resolution 1pf.
16. 2uf More capacitors can measure the equivalent series resistance at the same time. Two can be displayed in decimal values with a resolution of 0.01Ω.
17. Two diodes can be displayed in the correct order and the diode symbol, and the diode forward voltage is given.
18. The LED is detected as a diode with a higher forward voltage. The combination of LEDs is identified as two diodes.
19. Reverse breakdown voltage less than 4.5v zener diode can be identified.
20. Can measure a single diode reverse capacitance. If the bipolar transistor is connected to the collector and emitter of the base and pin, the collector or emitter junction reverse capacitance can be measured.
21. Can be connected with a single measurement rectifier bridge.
Specification:
Resistance: 0Ω-50MΩ Resolution: 0.01Ω
Capacitance: 25pf-100mf Resolution: 1pf
Inductance: 0.01mH-20H Resolution: 0.01mH
Measurement capacitance ESR Resolution: 0.01Ω
Battery: 9V battery (Not included)
Instructions:
1. Press the "boot / test" can be achieved boot and a test function, multiple tests can be repeated by this key; measured after 20 seconds, no operation automatically shut down.
2. The instrument provides patch, plug-in and external table three measurement methods, each way 1,2,3 feet are the same correspondence.
3. The device does not need to distinguish between the order of discipline, the measurement will be completed after the completion of each pin corresponding to the device function.
4. The instrument printed on the back of the electrolytic capacitor corresponding to the ESR typical reference table, the table is for reference only, please refer to the data published by the manufacturers.
5. Calibration
Short to 1, 2, 3 test points, press the "boot / test" button, the screen prompts whether to enter the calibration, in 2 seconds by "power on / test" button to confirm, enter the calibration.
After the screen prompts to disconnect 1, 2, 3 test points, continue after the break until the end of the prompt calibration.
Precautions:
Be sure to discharge the instrument before testing the capacitor, otherwise it may damage the instrument.
When using the adapter, use an adapter with a DC 9V-12V (including 9V, 12V) voltage range.
The instrument will not charge the battery, when the battery power is less than 6V, please replace the battery.
When the capacitor is discharged, it can be discharged without power on.
Packing Included:
1 x BSIDE ESR02PRO Digital Transistor Tester (Battery is not included)
Great ESR Inductance, Resistor, Cap and more Meter, a must have to test if the caps are ok, and MUCH more, it is VERY accurate, tested the ohms with a Elenco RS-500 and a calibrated Fluke 179 True-RMS Digital Multimeter, and the BSIDE ESR02PRO is also calibrated great, it graves almost all the same numbers as my Fluke 179.
I would recommend everyone this ESR Inductance, Resistor, Cap and more Meter, but be careful with the Plug-in device test seat, they can only be used with caps with normal small pins, use the external pen holder holes for the big caps and more.
I put a BSIDE ESR02PRO Typical ESR Value Of Electronic Capacitor unit paper with the photo's, so that you don't have to turn the BSIDE ESR02PRO around all the time to see what ohms the caps must be your testing.
Great ESR Inductance, Resistor, Cap and more Meter, a must have to test if the caps are ok, and MUCH more, it is VERY accurate, tested the ohms with a Elenco RS-500 and a calibrated Fluke 179 True-RMS Digital Multimeter, and the BSIDE ESR02PRO is also calibrated great, it graves almost all the same numbers as my Fluke 179.
I would recommend everyone this ESR Inductance, Resistor, Cap and more Meter, but be careful with the Plug-in device test seat, they can only be used with caps with normal small pins, use the external pen holder holes for the big caps and more.
I put a BSIDE ESR02PRO Typical ESR Value Of Electronic Capacitor unit paper with the photo's, so that you don't have to turn the BSIDE ESR02PRO around all the time to see what ohms the caps must be your testing.
Great ESR Inductance, Resistor, Cap and more Meter, a must have to test if the caps are ok, and MUCH more, it is VERY accurate, tested the ohms with a Elenco RS-500 and a calibrated Fluke 179 True-RMS Digital Multimeter, and the BSIDE ESR02PRO is also calibrated great, it graves almost all the same numbers as my Fluke 179.
I would recommend everyone this ESR Inductance, Resistor, Cap and more Meter, but be careful with the Plug-in device test seat, they can only be used with caps with normal small pins, use the external pen holder holes for the big caps and more.
I put a BSIDE ESR02PRO Typical ESR Value Of Electronic Capacitor unit paper with the photo's, so that you don't have to turn the BSIDE ESR02PRO around all the time to see what ohms the caps must be your testing.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-19 of 19|
Show Original
A part of the QA has been auto-translated.
0
Q:
, I want to make sure the maximum value of the capacitors measured is 100 microfarad isn’t that true? Cheers
, I want to make sure the maximum value of the capacitors measured is 100 microfarad isn’t that true? Cheers
Hi ! I have been using the meter and it measures correctly, I have already confirmed it with a capacitance meter and the measurements were correct.
Olá ! eu tenho utilizado o medidor e mede direitinho já cheguei a confirmar com um capacitimetro e as medidas bateram estavam certa .
Hi ! I have been using the meter and it measures correctly, I have already confirmed it with a capacitance meter and the measurements were correct.
Olá ! eu tenho utilizado o medidor e mede direitinho já cheguei a confirmar com um capacitimetro e as medidas bateram estavam certa .
Answered by Frankbarros on 29/12/2021Helpful (0)
0
Q:
can we use in-circuit testing if the capacitor is good or not?
can we use in-circuit testing if the capacitor is good or not?
Is this device capable to measure the capacitors, resistors etc. when they are soldered in the circuit board? And if yes, does it come with test leads to do that? Thank you
Is this device capable to measure the capacitors, resistors etc. when they are soldered in the circuit board? And if yes, does it come with test leads to do that? Thank you
Hello friends, it can measure the capacitance and resistance of the circuit board. This measurement method requires a test lead to be tested.
https://www.banggood.com/ANENG-SMD-Chip-Component-LCR-Testing-Tool-Multimeter-Pen-Probe-Lead-Tweezer-p-1223234.html?cur_warehouse=CN
However, there are some shortcomings in direct measurement on the circuit board, and some components are connected in series, which will affect the measurement results.
Hello friends, it can measure the capacitance and resistance of the circuit board. This measurement method requires a test lead to be tested.
https://www.banggood.com/ANENG-SMD-Chip-Component-LCR-Testing-Tool-Multimeter-Pen-Probe-Lead-Tweezer-p-1223234.html?cur_warehouse=CN
However, there are some shortcomings in direct measurement on the circuit board, and some components are connected in series, which will affect the measurement results.
Answered by The seller on 18/07/2022Helpful (0)
0
Q:
Can this tester test electrolytic capacitors in circuit?.. Meaning the capacitor does not need to be removed from the circuit board?
Can this tester test electrolytic capacitors in circuit?.. Meaning the capacitor does not need to be removed from the circuit board?